forum.1600i.de

Hi,

I am rebuilding my 1600i but I don't know what cam to use.

Does anyone know the part number for the ACD camshaft?

Thanks
P

Hallo,

schau mal bei VW Classicparts im Teilekatalog unter "service". Viele Grüße. KaBe

Hi

I checked the Classic Parts site and there are 3 different parts called "Camshaft"


113 109 019 G - 69.95 euros

113 109 023 G - 169.00 euros

113 109 027 G - 69.95 euros

They all say they are for the 1600i.

I imagine they all have a slightly different size timing gear but why are the prices different?

part Numers Camshaft ACD:

BAA109021 Standart +- 0 Original ACD Mexico/Brasil

025109021 Standart +-0 Original WBX 1,9 l DF ( I could be the same as the ACD)

025109021B Standart +-0 Original WBX 2,1l DJ, MV (For tuning, a 275 degree camshaft with 8.3 mm stroke, which also works with hydraulic tappets)

Thank you for this.

So the 025109021B Standard +-0 Original WBX 2,1l DJ, MV will work with Hydraulics and Manfreds 1804 chip?

I think so. The next Engine with this compnents is on work, but not done yet. And for an 1835i Manfred named the chip 1805.

Ok - thanks you very much for the advice (Your English is excellent too!)

I am going to build this:

90.5 Cylinders - 1776
32/35mm Valves
Hydraulic Tappets
Camshaft 025109021B Standard +-0 Original WBX 2,1l DJ, MV (For tuning, a 275 degree camshaft with 8.3 mm stroke, which also works with hydraulic tappets)
Balanced
Manfred 1804X Chip

I am hoping Manfred can confirm this configuration will work with 1804X chip and then I will start work

This camshaft could work too:http://www.ahnendorp.com/VW-Wasserboxer-Motorenteile-und-Bearbeitungen/Nockenwellen-und-Zubehoer-67/Schleicher-Nockenwelle-VW-Wasserboxer-292-Grad.html